chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Steering/Suspension - Pitman Arm Shaft Seal Service Kit|Page 15911 > < Steering/Suspension - Pitman Arm Shaft Seal Service Kit
Page 1
background image

Pitman Arm: Service and Repair

Pitman Arm Replacement

Tools Required

^

J 6632-01 Pitman Arm Puller

^

J 29107-A Pitman Arm Puller

Removal Procedure

1. Raise and suitable support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the power steering gear. 
3. Install the power steering gear into a vise.
4. Remove the pitman arm nut and washer.

5. Remove the pitman arm from the pitman shaft using J 6632-01 or J 29107-A.

Installation Procedure

1. Install the pitman arm to the power steering gear.

Notice: Refer to Fastener Notice.

2. Install a new pitman arm washer and nut.

Steering/Suspension - Pitman Arm Shaft Seal Service Kit|Page 15911 > < Steering/Suspension - Pitman Arm Shaft Seal Service Kit