Tahoe 2WD V8-5.3L VIN Z Flex Fuel (2004)
5. Remove the pressure sensor (2) from the front passenger seat frame, if equipped with the Inflatable Restraint Passenger Presence System.
6. Lift the seat cushion up off the rear plastic holders (1) on the underside of the seat cushion, and pull forward.
7. Remove the seat switch bezel.
8. Remove the lumbar actuator (5).
9. Unclip the seat trim cover from the seat cushion frame.
10. Using a side motion, carefully separate the seat cushion trim cover from the seat cushion pad.
11. If replacing the front passenger seat cushion you must also replace the Inflatable Restraint Passenger Presence System.
CAUTION: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. The bladder, the
