Tahoe 2WD V8-5.3L VIN Z Flex Fuel (2004)
10. Install the A/C line retainer to the fan shroud.
11. Install the air cleaner outlet duct.
12. Tighten the air cleaner outlet duct clamp at the throttle body.
Tighten the clamp screws to 7 Nm (62 inch lbs.).
13. Tighten the air cleaner outlet duct clamp at the mass airflow sensor.
Tighten the clamp screws to 7 Nm (62 inch lbs.).
W/O RPO M74
Fan Shroud Replacement- Upper (W/O M74)
Removal Procedure
1. Loosen the air cleaner outlet duct clamps from the throttle body.
2. Loosen the air cleaner outlet duct clamps from the mass airflow sensor.
3. Remove the air cleaner outlet duct.
