Tahoe 2WD V8-5.3L VIN Z Flex Fuel (2004)
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the knee bolster deflector bracket and nuts (1).
^
Tighten the nuts to 9 Nm (80 inch lbs.).
6. Install the knee bolster.
7. Install the TORX(R) head shift lever screw
^
Tighten the screw to 1.5 Nm (13 inch lbs.).
8. Roll the seal over the TORX(R) head shift lever screw.
9. Install the lower column trim cover.
10. Install the 2 TORX(R) head screws to the lower column trim cover.
^
Tighten the screw to 3.5 Nm (31 inch lbs.).
