Tahoe 2WD V8-5.3L VIN Z Flex Fuel (2004)
Wheel Bearing: Service and Repair
Rear Suspension
Rear Wheel Hub and Bearing Replacement
^
Tools Required
-
J 45859 Axle Remover
Removal Procedure
Notice: Refer to Rear Wheel Steering Lifting and Jacking Notice in Cautions and Notices.
1. Raise the vehicle.
2. Remove the tire and wheel.
3. Remove the outer tie rod from the steering knuckle.
4. Remove the brake rotor.
5. Remove the axle nut dust cover (4).
6. Remove the cotter pin (2) and retainer (3) from the wheel drive shaft nut.
7. Remove the wheel drive shaft retaining nut.
8. Remove the wheel hub and bearing retaining bolts.