chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Interior - Squeak From Front Seats|Page 24109 > < Front Seat Adjuster Switch Knob Replacement|Page 24100
Page 1
background image

Seat Back: Customer Interest
Interior - Squeak From Front Seats

TECHNICAL

Bulletin No.: 08-08-50-006

Date: April 16, 2008

Subject: 
Squeak Noise from Front Seats (Grease Spring on Lumbar Cable Assembly)

Models:
2008 Chevrolet Tahoe Hybrid
2008 GMC Yukon Hybrid

Built Prior to April 14, 2008

Condition

Some customers may comment on a squeak noise coming from the rear side of the front seat back.

Cause

This may be caused by the cable housing rubbing on the outboard spring from the seat lumbar system.

Correction

Technicians are to apply GM Super Lube(R), P/N 12346241 (in Canada, P/N 10953474) to the spring lumbar cable assembly (left and right) per the
instructions below:

1.

Remove the seat back panel by first detaching the toe kick elastic and then removing the two screws at the bottom of the seat back panel.

Important:

The seat back cover has four retaining hooks-two upper and one on each side as shown in the picture above (1).

2.

Position a rag behind the lumbar cable to prevent the seat back foam from becoming dirty.

Important:

DO NOT apply excess lubricant.

3.

Apply GM Super Lube(R), P/N 12346241 (in Canada, P/N 10953474) to the spring lumbar cable assembly (both left and right side).

Warranty Information

Interior - Squeak From Front Seats|Page 24109 > < Front Seat Adjuster Switch Knob Replacement|Page 24100