Tahoe 2WD V8-6.0L Hybrid (2008)
12. Position the rear brake pipe (3) to the BPMV (4) and secure the clip (1).
13. Install the brake pipe fitting (2).
Tighten the fitting to 18 N.m (13 lb ft).
14. Connect the EBCM electrical connector.
15. Bleed the BPMV. Refer to Antilock Brake System Automated Bleed Procedure (Without JL4) (See: Brake Bleeding/Service and Repair)Antilock
Brake System Automated Bleed Procedure (With JL4) (See: Brake Bleeding/Service and Repair) .
