Tahoe 2WD V8-6.0L Hybrid (2008)
*
If installing the original brake pads and shims, mark the position of the shims for the proper installation.
*
DO NOT reuse the brake pad shims with new brake pads. Replace with NEW only.
11. Remove the brake pad shims (4) from the mounting bracket (5).
Installation Procedure
1. Install the shims (4) to the mounting bracket.
*
Install the NEW shims if replacing the brake pads.
*
Install the original shims in their original position if installing the original brake pads.
Important: If installing the original brake pads, position the brake pads as marked during the removal procedure.
2. Install the brake pads (3).
3. Rotate the brake caliper (2) into the proper position on the mounting bracket (5).
