Tahoe 2WD V8-6.0L Hybrid (2008)
1. If removed, install the EBCM. Refer to Electronic Brake Control Module Replacement (Without JL4) (See: Antilock Brakes / Traction Control
Systems/Electronic Brake Control Module/Service and Repair)Electronic Brake Control Module Replacement (With JL4) (See: Antilock Brakes /
Traction Control Systems/Electronic Brake Control Module/Service and Repair)Electronic Brake Control Module Replacement (J92) (See:
Antilock Brakes / Traction Control Systems/Electronic Brake Control Module/Service and Repair) .
2. Position the BPMV (3) to the mounting bracket (1).
Notice: Refer to Fastener Notice .
3. Install the retaining nuts (2) to the BPMV (3).
Tighten to 9 N.m (80 lb in).
4. Position the BPMV and bracket assembly (13) to the frame.
5. Slide the BPMV assembly toward the rear of the vehicle.
6. Install the BPMV bracket bolts (12).
