Tahoe 2WD V8-6.0L Hybrid (2008)
10. Remove the park brake lever mounting nuts.
11. Position the floor carpet to expose the park brake cable pass-through grommet.
12. Release the park brake cable pass-through grommet from the vehicle floor.
13. Remove the park brake lever and front cable from the vehicle.
Installation Procedure
Important: Ensure the grommet for the front park brake cable is properly seated in the front floor panel.
1. Insert the front brake cable through the hole in the front floor panel and seat the pass-through grommet.
2. Position the floor carpet to the floor pan.
