chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine Mount Bracket Replacement - Left|Page 5423 > < Engine Mount Bracket Replacement - Left|Page 5421
Page 4
background image

1. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement   .
2. If the vehicle is equipped with four wheel drive (4WD), remove the front drive axle. Refer to Differential Carrier Assembly Replacement (8.25

inch)  Differential Carrier Assembly Replacement (9.25 inch)   .

3. Lower the vehicle.
4. Remove the engine mount to frame bolts (1).
5. Raise and support the vehicle halfway. Refer to Lifting and Jacking the Vehicle   .
6. Remove the left wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side   .

Important:  DO NOT raise and/or support the engine by the crankshaft balancer, or the oil pan.

7. Place an adjustable (screw type) jack to the tab (1) located on the engine block.

Engine Mount Bracket Replacement - Left|Page 5423 > < Engine Mount Bracket Replacement - Left|Page 5421