chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine Mount Bracket Replacement - Left|Page 5439 > < Engine Mount Bracket Replacement - Left|Page 5437
Page 20
background image

1. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement   .
2. If the vehicle is equipped with four wheel drive (4WD), remove the front drive axle. Refer to Differential Carrier Assembly Replacement (8.25

inch)  Differential Carrier Assembly Replacement (9.25 inch)   .

3. If the vehicle is equipped with 4WD, remove the front drive axle bracket bolts and bracket.
4. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side  (See: Exhaust System/Exhaust Manifold/Service and

Repair/Exhaust Manifold Replacement - Right Side) .

5. Remove the air conditioning (A/C) compressor bracket. Refer to Compressor Mounting Bracket Replacement (Non HP2)  Compressor Mounting

Bracket Replacement (HP2)   .

6. Remove the engine mount to frame bolts (1).

Important:  DO NOT raise and/or support the engine by the crankshaft balancer or oil pan.

7. Place an adjustable (screw type) jack to the tab (1) located on the engine block.

Engine Mount Bracket Replacement - Left|Page 5439 > < Engine Mount Bracket Replacement - Left|Page 5437