Tahoe 2WD V8-6.0L Hybrid (2008)
36. Connect the engine harness electrical connectors (5) to the right side fuel injectors.
37. Install the engine harness clip (4) to the ignition coil bracket stud.
38. Connect the engine harness electrical connector (3) to the throttle actuator.
39. Connect the engine harness electrical connector (2) to the ignition coil harness electrical connector.
40. Install the CPA retainer (1).
41. Install the engine harness clip (4) to the ignition coil bracket stud.
42. Connect the engine harness electrical connectors (3) to the left side fuel injectors.
43. Connect the engine harness electrical connector (2) to the ignition coil harness electrical connector.
44. Install the CPA retainer (1).
