Tahoe 2WD V8-6.0L Hybrid (2008)
3. Install the brake booster vacuum hose to the intake manifold nipple.
4. Position the brake booster vacuum hose clamp at the intake manifold.
5. Install the intake manifold. Refer to Intake Manifold Replacement (RPOs LY2/LY6) (See: )Intake Manifold Replacement (RPOs
LC9/LMG/LY5/L76) (See: )Intake Manifold Replacement (RPO L92 - First Design) Intake Manifold Replacement (RPO L92 - Second Design).
Upper Intake Manifold Sight Shield Replacement
Upper Intake Manifold Sight Shield Replacement
Removal Procedure
1. Open the hood.
2. Grasp the front of the intake manifold sight shield and lift up disengaging the grommets from the studs.
3. Remove the intake manifold sight shield from the retainer slots.
