Tahoe 2WD V8-6.0L Hybrid (2008)
Timing Cover: Service and Repair
Engine Front Cover - With RPO LY6, L76 and L92
Engine Front Cover Replacement (LY6, L76 and L92) (6.0L and 6.2L)
Tools Required
J 41476 Front and Rear Cover Alignment Tool
Removal Procedure
1. Remove the water pump. Refer to Water Pump Replacement (RPOs LY2/LC9/LY5/LMG/LFA) (See: Water Pump/Service and Repair)Water
Pump Replacement (RPOs LY6/L76/L92) (See: Water Pump/Service and Repair) .
2. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement (See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft
Pulley/Service and Repair) .
3. Disconnect the engine harness electrical connector (1) from the camshaft position (CMP) sensor wire harness electrical connector.
4. Remove the oil pan-to-front cover bolts (1).