Tahoe 2WD V8-6.0L Hybrid (2008)
7. Position the CMP sensor wire harness (2) to the front cover.
8. Connect the CMP sensor wire harness to the CMP sensor.
9. Install the CMP sensor wire harness bolts (1).
Tighten the bolts to 12 N.m (106 lb in).
10. Apply a 5 mm (0.20 in) bead of sealant, 20 mm (0.80 in) long to the oil pan to engine block junction. Refer to Sealers, Adhesives, and Lubricants
(See: Specifications/Sealers, Adhesives, and Lubricants) .
