Tahoe 2WD V8-6.0L Hybrid (2008)
10. Connect the left front HO2S electrical connector (2) to the engine wiring harness electrical connector (3).
11. Install the left front CPA retainer (2).
12. Install the muffler. Refer to Muffler Replacement (1500 - w/RPOs LC9/LMG/LY5/L76) (See: Muffler/Service and Repair)Muffler Replacement
(1500 - w/RPOs LMG/LY2/LY5) (See: Muffler/Service and Repair)Muffler Replacement (1500 - w/RPO L92) (See: Muffler/Service and Repair
)Muffler Replacement (2500) (See: Muffler/Service and Repair)Muffler Replacement (LFA) (See: Muffler/Service and Repair) .
13. Position the oil pan skid plate and tighten until snug the 2 rear oil pan skid plate bolts, install the 2 front oil pan skid plate bolts, if equipped.
Tighten the bolts to 28 N.m (21 lb ft).
14. Lower the vehicle.
