Tahoe 2WD V8-6.0L Hybrid (2008)
side-to-side, and work toward the outside bolts.
8. Using a flat punch, bend the gasket tab at the rear of the gasket around the cylinder head edge.
9. Position and align the marks on the upper intermediate steering shaft and the steering column.
10. Install the upper intermediate steering shaft (3) to the steering column.
11. Install the steering shaft coupling bolt (2) and nut (1) to the upper intermediate steering shaft.
Tighten the bolt/nut to 50 N.m (37 lb ft).
12. Install the spark plug wires to the spark plugs.
13. Install the spark plug wires to the ignition coils.
14. Inspect the spark plug wires for proper installation.
1. Push sideways on each boot in order to inspect the seating.
2. Reinstall any loose boot.
