Tahoe 2WD V8-6.0L Hybrid (2008)
Exhaust Pipe/Muffler Hanger: Service and Repair
Exhaust Muffler Insulator, Hanger, and Bracket Replacement (LFA)
Exhaust Muffler Insulator, Hanger, and Bracket Replacement (LFA) (6.0L)
Removal Procedure
Caution: Refer to Exhaust Service Caution .
Caution: Refer to Protective Goggles and Glove Caution .
Important:
*
Service the exhaust system insulators individually in order to retain the support for the exhaust system.
*
Do not use oil base lubricants.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger are inserted.
3. Remove the exhaust system insulator (1, 2 or 3), as required.
Installation Procedure
