Tahoe 2WD V8-6.0L Hybrid (2008)
4. Remove the right rear wheel speed sensor wiring harness clips from the frame and the control arm bracket.
5. Install a suitable adjustable jack under the rear axle.
6. Remove the right axle tie rod bolt (2) and nut (1).
7. Remove the rear axle vent hose from the rear axle, if necessary.
8. Remove the vent hose swivel clip from the rear brake crossover pipe, if necessary.
9. Remove the right rear stabilizer shaft link to frame bolt and nut.
10. Remove the right rear stabilizer shaft link from the frame.
11. Remove the right rear shock absorber lower bolt and nut.
12. Lower the right side of the rear axle using the adjustable jack in order to remove the muffler.
13. Remove the catalytic converter to muffler clamp bolt (1).
