Tahoe 2WD V8-6.0L Hybrid (2008)
1. Install the NEW exhaust seal(s) (1) as required.
2. Raise the catalytic converter assemblies into place using the adjustable jacks.
3. Install the catalytic converter assemblies to the exhaust manifolds.
Notice: Refer to Fastener Notice .
4. Install the catalytic converter to exhaust manifold nuts (2).
Tighten the nuts to 50 N.m (37 lb ft).
5. Position the exhaust pipe hanger bracket to the transmission.
6. Install the exhaust pipe hanger bracket bolts.
Tighten the bolts to 25 N.m (18 lb ft).
7. Remove the supports from the catalytic converter assemblies.
