Tahoe 2WD V8-6.0L Hybrid (2008)
1. Install the sight shield onto the ball studs (2) and tighten the sight shield fastener (1).
2. Install the fender brace.
Drive Motor Generator Control Module Replacement
Drive Motor Generator Control Module Replacement
Removal
Danger: Always perform the High Voltage Disabling procedure prior to servicing any High Voltage component or connection. Personal
Protection Equipment (PPE) and proper procedures must be followed.
The High Voltage Disabling procedure will perform the following tasks:
*
Identify how to disable high voltage
*
Identify how to test for the presence of high voltage
*
Identify condition under which high voltage is always present and personal protection equipment (PPE) and proper procedures must
be followed.
*
Failure to follow the procedures exactly as written may result in serious injury or death.
Perform the High Voltage Disabling procedure. Refer to High Voltage Disabling.
