Tahoe 2WD V8-6.0L Hybrid (2008)
6. Temporarily install the PIM electronics cover (2) with 4 finger-tightened fasteners (1).
7. Rotate the drive motor generator control module assembly onto the PIM electronics cover.
8. Remove the APM to PIM mounting fasteners (1).
9. Remove the APM (2) and discard the coolant seal (3).
10. Remove the coolant tube mounting fasteners (4, 7).
11. Remove the coolant tubes (5, 8).
12. Remove and discard coolant seals (6, 9).
Assemble