Tahoe 2WD V8-6.0L Hybrid (2008)
Important: Snap Fit TPM sensors are still shipped in the OFF mode. However, the TPM no longer needs to be spun to remove it from
the OFF mode. The sensor will exit its OFF state when the tire is inflated. The technician can then program the vehicle as normal.
4. Mount the tire to the rim. Refer to Tire Mounting and Dismounting (See: Tires/Service and Repair/Removal and Replacement) .
5. Install the tire/wheel assembly on the vehicle. Refer to Tire and Wheel Removal and Installation (See: Service and Repair) .
6. Lower the vehicle.
7. Learn the tire pressure sensors. Refer to Tire Pressure Sensor Learn (Standard) (See: Tire Monitoring System/Service and Repair) .
