Tahoe 2WD V8-6.0L Hybrid (2008)
Wiring Harness: All Technical Service Bulletins
Hybrid - Reinstalling Hybrid Transmission Drive Motors
INFORMATION
Bulletin No.: 10-06-122-001
Date: November 03, 2010
Subject: Reinstalling Hybrid Transmission Drive Motors On 2-Mode Hybrid Full Size Trucks
Models:
2008-2009 Cadillac Escalade Hybrid
2008-2009 Chevrolet Tahoe Hybrid
2009 Chevrolet Silverado Hybrid
2008-2009 GMC Yukon Hybrid
2009 GMC Sierra Hybrid
All Equipped with 2ML70 Hybrid Transmission (RPO M99)
All Built Prior to VIN Breakpoint 10020698
During service of a 2-Mode hybrid drive motor, the motor harness can easily be damaged if the appropriate precautions are not used. When reinstalling a
drive motor, sharp edges of the transmission case access opening may chafe or cut the harness when the drive motor is fed through the case opening.
Recommendation
Use the procedure and parts below to protect the drive motor harness PRIOR to reinstallation into the transmission case.
1. Remove the black plastic wiring harness clip (1) from the motor casing and pull the harness out of the clip, exposing the drive motor wires (2).
