Tahoe 2WD V8-6.0L Hybrid (2008)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor Replacement - Bank 2 Sensor 2
Heated Oxygen Sensor Replacement - Bank 2 Sensor 2
Removal Procedure
Notice: Refer to Heated Oxygen and Oxygen Sensor Notice.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the connector position assurance (CPA) retainer (5).
3. Disconnect the HO2S electrical connector (7) from the engine wiring harness electrical connector (6).
Notice: Refer to Excessive Force and Oxygen Sensor Notice.
4. Remove the HO2S (3).
