Tahoe 2WD V8-6.0L Hybrid (2008)
11. Connect the right front HO2S electrical connector to the engine wiring harness electrical connector (1).
12. Install the right front CPA retainer (5).
13. Install the muffler. Refer to Muffler Replacement (1500 - w/RPOs LC9/LMG/LY5/L76) (See: Engine, Cooling and Exhaust/Exhaust
System/Muffler/Service and Repair)Muffler Replacement (1500 - w/RPOs LMG/LY2/LY5) (See: Engine, Cooling and Exhaust/Exhaust
System/Muffler/Service and Repair)Muffler Replacement (1500 - w/RPO L92) (See: Engine, Cooling and Exhaust/Exhaust
System/Muffler/Service and Repair)Muffler Replacement (2500) (See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair
)Muffler Replacement (LFA) (See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair) .
14. Install the transmission crossmember. Refer to Transmission Support Crossmember Replacement (4WD 2500 series) Transmission Support
Crossmember Replacement (2WD 1500 series) Transmission Support Crossmember Replacement (2WD 2500 series) Transmission Support
Crossmember Replacement (4WD 1500 series) .
15. Position the oil pan skid plate and tighten until snug the 2 rear oil pan skid plate bolts, install the 2 front oil pan skid plate bolts, if equipped.
Tighten the bolts to 28 N.m (21 lb ft).
16. Lower the vehicle.
