Tahoe 2WD V8-6.0L Hybrid (2008)
4. Loosen the air cleaner outlet duct clamp (1) at the mass air flow (MAF)/intake air temperature (IAT) sensor.
5. Loosen the air cleaner outlet duct clamp (2) at the throttle body.
6. Lift up the air cleaner outlet duct at the resonator tab in order to separate the resonator from the stud on the intake manifold.
7. Remove the air cleaner outlet duct (3) from the throttle body and MAF/IAT sensor.
Installation Procedure
Important: Ensure that the notch in the air cleaner outlet duct throttle body aligns with the boss on top of the throttle body.
1. Install the air cleaner outlet duct (3) to the throttle body and MAF/IAT sensor. Ensure that the resonator tab aligns with the stud on the intake
manifold.
2. Push down on the air cleaner outlet duct resonator directly over the resonator tab in order to secure the resonator to the stud on the intake
manifold.
3. Tighten the air cleaner outlet duct clamp (2) at the throttle body.
Notice: Refer to Fastener Notice.
