Tahoe 2WD V8-6.0L Hybrid (2008)
1. Install the CKP sensor.
Notice: Refer to Fastener Notice.
2. Install the CKP sensor bolt.
Tighten the bolt to 25 N.m (18 lb ft).
3. Connect the engine wiring harness electrical connector (1) to the CKP sensor.
4. Position the engine wiring harness sleeve (2) over the CKP sensor electrical connection.
5. Lower the vehicle.
6. Perform the CKP system variation learn procedure. Refer to Crankshaft Position System Variation Learn.
