chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Other Service Bulletins for Engine Control Module: > < SRS - DTC's B0083/B0084 After Impact Sensor Replacement
Page 2
background image

^

Refer to the table above for correct P/N to update the SDM Operating System and SDM System Calibration using SPS.

FOR BUMPER REPLACEMENT

^

When bumper bar replacement is required on any 2007 and 2008 vehicle, refer to the table for the correct P/N.

^

For vehicles built after 9/17/2007, replace the Inflatable Restraint Front End Sensor (EFS) with P/N 25896408 (2nd design).

^

Verify the SDM calibration P/N, which is dependent upon the RPO option and build date (see table).

If the vehicle comes in with the air bag deployed, all appropriate service protocols/bulletins need to be followed, including the ones above.

The table shows what part numbers and calibration are compatible with each other.

Disclaimer

All Other Service Bulletins for Engine Control Module: > < SRS - DTC's B0083/B0084 After Impact Sensor Replacement