Tahoe 2WD V8-6.0L Hybrid (2008)
2. Install the power steering fluid cooler bolts (2).
Tighten the bolts to 9 N.m (80 lb in).
3. Connect the power steering fluid cooler hose (4) to the power steering pump (1).
4. Connect the power steering fluid cooler hose (3) to the steering gear (2).
5. Clean any excess fluid from the vehicle and remove the drain pans.
6. Install the radiator grille reinforcement support, if equipped. Refer to Radiator Grille Reinforcement Support Replacement .
7. Install the fascia grille. Refer to Fascia Grille Replacement (Z71) Fascia Grille Replacement (Suburban, Tahoe) Fascia Grille Replacement
(Escalade) Fascia Grille Replacement (Yukon) Fascia Grille Replacement (GMC HP2) .
8. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair) .
