Tahoe 2WD V8-6.0L Hybrid (2008)
electrical connector.
6. Engage the power steering assist motor electrical harness connectors (1) to the electronic power steering control module.
7. Ensure the connector cam lever (3) and the connector cam lever lock tab (2) are fully engaged.
The connector in the graphic is shown upside down for clarity.
8. Secure the power steering assist motor electrical harness connector position assurance tab (3).
9. Install the engine shield. Refer to Engine Shield Replacement .
10. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
11. Perform the high voltage enabling procedure. Refer to High Voltage Enabling .
12. Perform the power steering control module setup procedure. Refer to Power Steering Control Module Programming and Setup .
