Tahoe 2WD V8-6.0L Hybrid (2008)
sealed. Fluid trapped in this area during assembly may seep from the adjuster plug. The rack should not be replaced for this condition.
-
You can distinguish seepage from an active leak by removing the left tie rod boot clamp and inspecting for the presence of fluid at the inner tie
rod.
-
If no fluid is found in the left tie rod boot, replace the boot clamp and clean the seepage from the rack. No further action is needed.
-
If fluid is found in the left tie rod boot, replace the gear assembly.
Warranty Information
For vehicles repaired under warranty please refer to the Labor Time Guide and claim the applicable Labor Operation for the repaired or replaced
component.
Disclaimer
