Tahoe 2WD V8-6.0L Hybrid (2008)
Fluid Pump: Service and Repair
Automatic Transmission Auxiliary Fluid Pump and Gasket Replacement
Automatic Transmission Auxiliary Fluid Pump and Gasket Replacement
Removal Procedure
1. Disconnect the auxiliary fluid pump wire harness (1) from the auxiliary fluid pump control module connector (2).
2. Remove the auxiliary fluid pump wire harness (6) from the harness retainers (7).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Remove the auxiliary fluid pump wire harness clip nut (3).
5. Place a suitable drain pan under the transmission auxiliary fluid pump.
Notice: Refer to Fastener Notice .
6. Remove the auxiliary fluid pump bolts (1).
