Tahoe 2WD V8-6.0L Hybrid (2008)
4. Replace the pressure regulator valve inner spring. The spring is shown as part number 234 in the picture above.
5. Install the torque dampener housing to the transmission.
6. Install the transmission.
A new spring can be obtained through the Warranty Parts Center; you will need to E-mail or fax a completed Warranty Parts Center (WPC) request
(shown below). The WPC part number is #573 and the WPC will ship you one spring.
IMPORTANT NOTE WHEN PRINTING THIS FORM: If the form prints out on two pages, make certain you fax BOTH pages so the WPC receives
all the needed information. Missing information will delay or prevent the part from being shipped.
