Tahoe 2WD V8-6.0L Hybrid (2008)
14. Remove the range selector cable (2) from the transmission range selector lever ball stud.
15. Remove the retainer (1) that secures the cable to the bracket.
16. Depress the tangs and remove the cable from the bracket.
17. Remove the transmission range selector cable from the vehicle.
Installation Procedure
1. Install the transmission range selector cable to the vehicle.
2. Ensure that the transmission manual shaft lever is in the mechanical park position.
3. Align and install the range selector cable (2) to the bracket.
4. Install the retainer (1) that secures the cable to the bracket.
5. Install the range selector cable end to the transmission range selector lever ball stud.
6. Install the cable clip on the transfer case, if equipped.
