Tahoe 2WD V8-6.0L Hybrid (2008)
Flex Plate: Service and Repair
Automatic Transmission Flex Plate Replacement
Removal Procedure
1. Remove the automatic transmission. Refer to Transmission Replacement .
Important: Note the position and direction of the engine flywheel before removal.
2. Remove the flywheel bolts (1).
3. Remove the flywheel.
Installation Procedure
Important: The flywheel does not use a locating pin for alignment and will not initially seat against the crankshaft flange or spacer, if
applicable, but will be pulled onto the crankshaft by the engine flywheel bolts. This procedure requires a three stage tightening process.
