Tahoe 4WD V8-393 6.5L DSL Turbo VIN S (1995)
Auxiliary Heater Hose Assembly Routing Rear
Remove or Disconnect
Tool Required:
J 38723 Heater Line Quick Connect Separator or Equivalent
Raise the vehicle and support with suitable safety stands.
1. Engine coolant.
2. Bolts.
3. Rear hose assembly from front hose assembly.
-
Push rear hose assembly into front hose assembly and insert J 38723 or equivalent into hose to release locking tabs.
4. Rear hose assembly from auxiliary heater core.
-
Push rear hose assembly into auxiliary heater core and insert J 38723 or equivalent into hose to release locking tabs.
Install or Connect
1. Rear hose assembly to front hose assembly.
-
Push rear hose assembly into front hose assembly until retainer tabs lock.
2. Rear hose assembly to auxiliary heater core. ^ Push rear hose assembly into auxiliary heater core until retainer tabs lock.
3. Bolts. Tighten bolts to 17 Nm (13 lbs. ft.).
4. Engine coolant.
-
Lower the vehicle.
-
Check the system for leaks.
Heater Pipes
