chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Temperature Door Actuator|Page 8838 > < Mode Door Actuator|Page 8835
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Temperature Door Actuator

Temperature Actuator Location

Temperature Actuator Replacment

Remove or Disconnect 

1. Negative battery cable. 
2. Roll instrument panel forward. 
3. Electrical connector.
4. Screws.
5. Actuator.

Adjust

A. Electrical connector to the actuator.
B. Turn the ignition key to the run position and let the actuator position itself.
C. Turn off the ignition key.
D. Remove the actuator from the electrical connector.

Install or Connect 

1. Actuator.
2. Screws.
3. Electrical connectors.
4. Instrument panel compartment.
5. Negative battery cable.

^Check circuit operation.

Temperature Door Actuator|Page 8838 > < Mode Door Actuator|Page 8835