Tahoe 4WD V8-393 6.5L DSL Turbo VIN S (1995)
Control Assembly: Service and Repair
Without Air Conditioning
Main Unit (Front)
Control Assembly Replacment
Remove Or Disconnect
-
Instrument cluster trim plate.
-
Control assembly by releasing the snap-fit retainers with a small screwdriver.
-
Electrical connection.
-
Cables from the control assembly by releasing retainers.
-
Blower switch.
-
Remove the blower switch rotary knob and the retaining clip from the shaft of the blower switch.
Install Or Connect
-
Blower switch. Hold the blower switch in position and install the retaining clip. Install the blower switch rotary knob.
-
Cables to the control assembly.
-
Electrical connection.
-
Control assembly to the instrument panel by snapping in.
-
Instrument cluster trim plate.
-
Check Circuit Operation
Auxiliary Unit (Rear)
Auxiliary Heater Control Switch
Remove or Replace
1. Instrument cluster trim.
2. Electrical connectors
3. Control switch from instrument cluster trim.
Install or Connect