chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fuel Return Line|Description and Operation|Page 4302 > < Fuel Return Line|Description and Operation
Page 1
background image

Fuel Return Line: Testing and Inspection

The diagnosis of fuel odor may be a condition of a leaking fuel feed, or return pipe or hose. Fuel pipes that are pinched, plugged, or mis-routed may
cause restricted fuel delivery. Any restriction in the fuel return system could greatly effect driveability. If other diagnosis indicates or the fuel return
system is suspected of being restricted, it should be tested.

FUEL RETURN SYSTEM RESTRICTION CHECK

1. Disconnect the hose of the fuel return line at the fuel sender.
2. Disconnect the hose of the fuel return line at the injection pump and connect a vacuum pump with gauge to the hose.
3. Apply vacuum to the return line and observe the gage reading.

-

If vacuum does not build and hold, go to Step 4.

-

If vacuum builds and holds, repair the return line restriction.

4. Connect the fuel return line at the injection pump and fuel sender.
5. Clean any fuel spillage.
6. Run the engine to check for fuel leakage.

Fuel Return Line|Description and Operation|Page 4302 > < Fuel Return Line|Description and Operation