Tahoe 4WD V8-393 6.5L DSL Turbo VIN S (1995)
WHAT WE WILL DO
To correct this condition, the rerouting of the center lap belt is necessary. Since rerouting of this belt can easily be done, and to reduce your
inconvenience, we are enclosing the instructions with this letter. The lap belt may be rerouted by you or, if you desire, your Chevrolet dealer will reroute
the lap belt for you at no charge.
WHAT YOU SHOULD DO
Please contact your Chevrolet dealer as soon as possible to arrange a service date and so the dealer may order the necessary parts for the repair.
Instructions for making this correction have been sent to your dealer. The labor time necessary to perform this service correction is approximately 15
minutes. Please ask your dealer if you wish to know how much additional time will be needed to schedule and process your vehicle.
The enclosed owner reply card identifies your vehicle. Presentation of this card to your dealer will assist in making the necessary correction in the
shortest possible time. If you have sold or traded your vehicle, please let us know by completing the postage paid reply card and returning it to us.
Your Chevrolet dealer is best equipped to provide service to ensure that your vehicle is corrected as promptly as possible. If, however, you take your
vehicle to your dealer on the agreed service date, and they do not remedy this condition on that date or within five (5) days, we recommend you contact
the Chevrolet Customer Assistance Center by calling 1-800-222-1020.
After contacting your dealer and the Customer Assistance Center, if you are still not satisfied that we have done our best to remedy this condition without
charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 400 Seventh Street,
S.W., Washington, D.C. 20590 or call 1-800-424-9393 (Washington D.C. residents use 202-366-0123).
We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your safety and continued satisfaction with our
products.
Seat Belt Rerouting Instructions
1.
From cargo area behind rear passenger seat, release and push rear seat forward.
2.
Pull seat back filler panel (hinged panel that covers back of seat) up towards you to expose back of seat.
3.
If center seat belt is routed behind padded seat frame support bar (see Figure 1), no further action is required. Check the box next to "Campaign
Completed By Owner" on the enclosed card and return it to us so our records are complete.
4.
If center seat belt is routed in front of padded seat frame support bar (see Figure 2), return seat to its normal upright position and push seat belt
down through seat belt opening in seat cushion.
5.
Push seat back forward and finish pulling seat belt out of seat cushion.
6.
Route seat belt behind padded seat frame support bar as shown in Figure 1, and back up through seat belt opening in seat cushion.
7.
Pull rear seat back up to upright position. Reach over seat and continue pulling seat belt through seat belt opening.
8.
Check the box next to "Campaign Completed By Owner" on the enclosed card and return it to us so our records are complete.
