Tahoe 4WD V8-393 6.5L DSL Turbo VIN S (1995)
Fig. 14 Servo Pin Gauge Installation.
a. Place gauge pin part No. J-21370-10 in servo bore, Fig. 14.
b. Position band apply pin checking tool No. J-38737 or equivalent over the bore with hex nut facing parking pawl linkage.
c. Secure with two rear cover bolts, then tighten to specifications.
d. Ensure gauge pin moves freely in tool and pin bore.
e. Determine correct pin length by torquing to 25 ft. lbs. the nut on gauge.
