Tahoe 4WD V8-393 6.5L DSL Turbo VIN S (1995)
3. Gasket (48) spacer plate to case.
4. Manual valve (319) into valve body.
5. Complete valve body assembly (44) onto case (7). Use 1 25025-5 guide pin set.
IMPORTANT
^
Attach manual valve to detent lever.
6. Transmission fluid pressure switch assembly (40) onto valve body assembly (44).
7. Spring and roller assembly (41) into place.
8. Three wiring clamps (33), fluid indicator stop (43) and lube pipe clamp (38).
9. Twenty-one bolts (35). Using 10 mm socket.
10. Six bolts (76) using 8 mm socket into transmission fluid pressure switch assembly (40).
11. Lube pipe (39) long end into case, short end into valve body.
12. Lube pipe retainer (37) with short bolt (36).
TIGHTEN
^
Bolts (35, 36 and 76) to 11 Nm (97 lb. in.).
