Tahoe 4WD V8-393 6.5L DSL Turbo VIN S (1995)
Fig. 5 Differential Case Bolt Torque Sequence.
11. Install flange half of differential case over cone, insert case bolts finger tight. Tighten bolts one turn at a time in sequence shown in Fig. 5. Then
torque case bolts to 30 ft. lbs.
12. If ring gear was removed, position it so that holes line up with case holes.
13. Lubricate new attaching bolts with clean engine oil and install.
14. Tighten bolts evenly and alternately around the case. When all bolts are snug, torque evenly and alternately to 120 ft. lbs.