chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Transmission/Transaxle|Page 6432 > < Transmission/Transaxle|Page 6430
Page 44
background image

Fig. 2 Exploded View Of Dana Front & Rear Drive Axle w/9 3/4 Inch Ring Gear.

1. Remove axle shafts. Refer to 

Axle Shaft, Conventional Fixed/Floating / Service and Repair.  See: Drive Axles, Bearings and Joints/Axle Shaft

Assembly/Service and Repair

2. Remove plug and drain lubricant from carrier.
3. Remove carrier cover attaching screws, then the cover and gasket, 

Figs. 1 and 2.

4. Mark one side of carrier and matching bearing cap for assembly reference, then remove the bearing caps.

Transmission/Transaxle|Page 6432 > < Transmission/Transaxle|Page 6430