Tahoe 4WD V8-393 6.5L DSL Turbo VIN S (1995)
12. Nut and washer securing the transmission mount to the crossmember.
-
Tighten bolts to 52 Nm (38 ft. lbs.).
13. Two bolts and washers securing the mount to the transmission.
-
Tighten bolts to 47 Nm (35 ft. lbs.).
14. Two bolts, two washers, and a nut securing the brace to the engine and transmission.
-
Tighten transmission to engine brace bolts (Gasoline Engine) to 55 Nm (41 ft. lbs.).
-
Transmission to engine brace bolts (Diesel Engine) to 70 Nm (51 ft. lbs.).
15. Exhaust pipe to the exhaust manifolds and the muffler assembly to the exhaust pipe if required.
16. Transfer case and adapter to the transmission. (four wheel drive only).
17. Propeller shaft to the transmission (two wheel drive only).
18. Propeller shafts to the transfer case (four wheel drive only).
19. Shift cable to the transmission shift lever.
-
Lower the vehicle.
20. New transmission oil.
21. Negative battery cable.
22. Start the engine and check for transmission oil leaks.
23. Test the transmission for normal operation.
