Tahoe 4WD V8-5.3L (2007)
1. Compress the timing chain tensioner guide and install the EN 46330.
Important:
^
Properly locate the CMP actuator on the locating pin of the camshaft.
^
The sprocket teeth and timing chain must mesh.
^
The camshaft and the crankshaft sprocket alignment marks MUST be aligned properly.
^
DO NOT use the CMP solenoid valve again. Install a NEW valve during assembly.
Identify the alignment hole (1) in the rear face of the CMP actuator and the locating pin (2) on the front face of the camshaft.