Tahoe 4WD V8-5.3L (2007)
Tighten the propeller shaft yoke retaining clamp bolts to 25 N.m (18 lb ft).
12. Install the brake rotors (8.6 inch, 9.5 inch axles).
13. Install the brake calipers (8.6 inch, 9.5 inch axles).
14. Install the tire and wheel.
15. Fill the drive axle. Refer to Rear Axle Lubricant Replacement.
16. Inspect and add axle lubricant to the axle housing, if necessary.
17. Lower the vehicle.
Rear Axle Housing Cover and Gasket Replacement
Rear Axle Housing Cover and Gasket Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Drain the rear axle.
^
For the 8.6 inch axle, loosen the rear cover bolts to allow the fluid to drain from the rear axle.
^
For the 9.5 inch LD and 9.5 inch HD axles, remove the drain plug.