Tahoe 4WD V8-6.2L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the adjustable pedal position sensor bolts (1) and tighten to 2 Nm(18 lb in).
3. Connect the adjustable pedal position sensor jumper harness electrical connector (1).
4. Install the driver knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) (See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair)Knee Bolster Replacement (Cadillac) (See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
).